How To Forecast Earthquakes the ‘Dutchsinse’ Way?

E&W’s version of How to Forecast Earthquakes which can be translated in YouTube

Official Dutchsinse How to Forecast video.

Download PDF map

Use the map to work out where you are. Watch out for deep earthquakes where they often appear on the letter ‘D’. Then watch the progression of shallow earthquakes from the letter ‘D’. Watch for a few days and you see these patterns of silent zones filled in and progression along the arrows.

How To Forecast in 4 Easy Steps

 
Forecasting earthquakes is based on what information you have, work out what is next and allow the possibility of error and alterations unlike a prediction. Once you learn this, you will surprise yourself! This will hopefully encourage you to delve in further with your own research and the learning will continue…. But first here are the basics in 4 easy steps..
– (Written by moderator Sue)
1. Look up your fault lines
USGS website with fault lines.
USGS website with fault lines. https://earthquake.usgs.gov/earthquakes/map/
 
2. Look up the last 48 hours of earthquakes in EMSC https://www.emsc-csem.org/#3w
EMSC website showing the last 48 hours of earthquakes
EMSC website map view from: https://www.emsc-csem.org/#3w
 
 
3. Look for 2 dots where earthquakes are on the same line and find the point in the middle
 
•——x——•
 
4. Look for another 2 dots etc etc
Those are where your forecasts will be and if one pops up near the forecast point, then you have to alter your forecast which can be within days.. Like how wind can change direction blowing rain elsewhere.
 
 
The arrows (above) are a clue on the direction of pressure originating from a deep earthquake of 200+km (usually from the letter D zones) and then they decrease in magnitude. Swarms of multiple magnitudes in one area can build up to large quakes.
Note EMSC’s map is not fully populated which means there are more earthquakes than shown on the website.. Using this video livestream has several feeds from USGS and EMSC and GEONET etc etc.. https://www.twitch.tv/dutchsinseofficial
Or download there software here: http://www.wolton.net/quake.html#free
RESULTS will appear within 7-10 days
 
This method is taught by Dutchsinse. In the text below he describes the method more in depth. Text taken and adapted from his website: https://www.dutchsinse.com/12152014-how-to-forecast-an-earthquake/
 
Enjoy learning with us.  It is simple, free and life saving…
 
 

Forecasting Earthquakes in Detail. By Dutchsinse


Major stress has built upon the edge of the craton over the past 7 days, multiple 4.0M+ events in Oklahoma, Nevada, and off the West coast.

The pressure placed upon the unsubducted “edge” of the plate has now resulted in a 2.9M (3.0M) earthquake in North Carolina, along the Blue Ridge mountains.

This was expected.

Expected?  How? Why? Who was expecting it?

[Dutchsinse has been monitoring earthquakes daily and globally since 2010 and went public on YouTube in 2011. For years he is has been battling through media, skeptic public opinion and even professional seismologists. Dutchsinse’s technique consists of monitoring daily and globally which helps estimate and calculate patterns in the next 3-7 days. Many news articles and seismic agencies have stated that earthquakes were not predictable nor are there is a relationship between them as well as volcanoes. Dutchsinse’s method in forecasting is controversial and has opposing views to today’s modern science. The battle has continued for many years for Dutchsinse against professional knowledge.]

Most of my viewers and readers know, we have been able to FORECAST several earthquakes using this new knowledge of “pressure transfer” across vast distances.

I knew to watch North Carolina, Tennessee, and Virginia based upon the movement happening in Oklahoma, Nevada, and off the West coast.

This isn’t guesswork, you can know for certain, that when pressure is placed on a relatively solid object on one side , the object being pressed will move in the opposite direction from which the pressure is coming.

    


Like plates of ice , cracked, floating on a lake. if you push one plate, it will push the plate next to it.  Now imagine those plates are closely butted up against one another, with not much area to “move” laterally.

 

The pressure will build upon the entire structure of the plate while trying to evenly distribute itself throughout the mass. The stress will find the weakest points , and release at those points. The “edge” of the craton is the defining line between the “solid” plate, and the weaker “deformed” edge.


Instead of crack and mounds of ice along an ice sheet fracture zone, the rock formations of the fractured plate have formed mountain ranges along the weak inner edge of the craton for eons, thus the mountains of the United States are now confirmed to literally be plate material forced UPWARDS via pressure which COMES FROM THE WEST, when subduction is not capable of keeping up with the tectonic pressure from the Pacific plate, the pressure does indeed TRANSFER across vast distances in a short amount of time (days or less – even hours in some cases).

January 2012, the craton edge is revealed by earthquakes. Excessive activity along the West coast, caused by excessive activity in the far West Pacific. The plates of the planet seen in the diagram are all being displaced by the Pacific unrest event (global surge).

 

When the pressure “transfers” across the solid mass of the solid portions of the plate, it finds weak points to release , such as fracking operation injection wells, oil drilling locations, hot springs, dormant volcanoes, and even some deep mining locations.

The fracking operations, oil drilling ops, dormant volcanoes, and deep mines act like perforation points, where the pressure is releasing.

No doubt, at this point I can say for certain, the rolling foothills of the New Madrid seismic zone can also now be confirmed to be caused by past built pressure, causing a BUCKLING in the plate, and massive earthquakes in the midwestern United States.

The new drilling / fracking operations are acting like a relief valve along the center portion of the craton. Normally (naturally) the pressure coming from the West (in the past) would have been placed on the center of the craton (in missouri and the new madrid seismic zone).

Now the fracking operations , drilling operations are “weak points” extending a few miles down into the crust — like perforations in a cardboard box, weak points where bending / breaking can occur.

Notice the THOUSANDS of 3.0 – 5.0M earthquakes which have occurred during the past few years in Oklahoma, Arkansas, Texas, Kansas, and Colorado — ALL occurring unexpectedly , and all occurring at fracking operations.

Notice the hundreds of 3.0-4.0M earthquakes at the dormant volcanoes along the deformed edge of the craton in Nevada, Arizona, Idaho, Wyoming, California, and even at a dormant volcano / extinct volcano in Georgia!.

Notice the movement of Yellowstone region , moving 1/2inch SOUTHEAST (pushed SE along the edge of the craton).

Notice the confirmed UPLIFT of the magma chambers of Yellowstone Volcano, Mt. St. Helens, Mount Shasta, and Mount Rainier.

The uplift of the magma chambers, the movement of the craton edge, and the multiple earthquake swarms associated with each location proves that the pressure is coming from the WEST, unlike modern day geology thought , which says one earthquake does NOT lead to another, and that the spread of the Midatlantic ridge is what causes mountains to form in the Americas.

The “subduction” process is not keeping up with the movement associated with the Pacific Plate unrest event which has been occurring since before the 2011 Japan megaquake.

The DOZENS of unexpected large volcanic eruptions (globally in diverse areas), and also the rumbling of ancient volcanoes in Scotland, Russia (moscow), and Mono Lake (california) proves the unrest event is indeed global.

This “unrest event” (as I’m calling it) was referred to as a “Global Surge” by professionals a few months ago in Vancouver Canada at the annual geophysics meeting. Professional seismologists have acknowledged a surge in global large earthquake events, but are puzzled as to why it is occurring.

[They do not mention the] “global surge” or “unrest event” is being caused DIRECTLY by a deep disturbance in the Asthenosphere, which centers around Vanuatu – West to the Indo-Australian plate boundary, North to Japan, and EAST across the entire Pacific plate to Central / South America.

Above: Past 7 days of earthquakes up to Dec. 15, 2014 230am CST shows the deep asthenosphere cluster point at Vanuatu, and the 6.2M which struck NW of Vanuatu in the Philippines.

Repeatedly, we see deep earthquakes in the 4.0M-5.0M range , occurring at approximately 300-400 miles depth.  The area inside the Earth known as the Asthenosphere.

These repeat 4-5M earthquakes will happen back and forth, between the West Pacific, and South America / Central America.

Both locations (West and East Pacific) having multiple large volcanic eruptions , some at normally quiet volcanoes.  The unrest in the Asthenosphere (350 miles deep), ALWAYS is shortly followed by larger shallower earthquakes (within approximately 1 week or less).

asthenosphere west pacific may 22 2014 (UNABLE TO FIND IMAGE)

If you see a cluster of deep earthquakes, watch the nearby adjacent area for a large shallow earthquake — as “compensation movement / pressure transfer” . The larger shallow earthquakes usually occur to the NW of the asthenosphere (deep EQ) swarm locations.

For instance, usually after we see a swarm of deep events in Papua New Guinea, we see a larger shallow earthquake strike NW in the Philippines or Japan.

Another example, usually after we see a swarm of deep events along the Chile/Argentina border, we see a larger shallow earthquake strike NW in Peru to central America.

The unrest event happens back and forth like a tennis match, as the pressure comes from deep within the Earth (from a yet unknown source) the transfer of the force must be causing a displacement of the Pacific plate from ‘beneath’.

The area beneath the plates, above the liquid molten core of the Earth, the semi-melt area known as the “Asthenosphere” is the interacting point between the fluid, and the solid. This area is having earthquakes due to some internal force causing a displacement on the semi melt.

The semi-melt then must be displacing the upper more rigid plate, which subsequently causes displacement across vast distances on the PLATE BOUNDARIES around the entire planet.

Finally, this leads us back to the United States craton pressure coming from the NW pushing to the SE.


Now you can understand why we’re seeing earthquakes at fracking operations, dormant volcanoes, ancient volcanoes, extinct volcanoes… why multiple new eruptions are happening… why entire areas are being uplifted in a short amount of time… and why textbooks in science today need to be revisited, and give me a shout out finally in a footnote for discovering all this on my own in my spare time while also working on weather, solar, and even false flag information.

🙂

After years of watching this happen, I think its high time that I explained the process in text, and how you can repeat it.

Again, watch for deep asthenosphere earthquakes, then watch the areas nearby / adjacent of those deep swarms for shallow large movement.

In the USA, watch for pressure from the West showing as mulitple 3.0M to upper 5.0M earthquakes off the West Coast. Then watch the craton edge as the pressure transfers across WA, OR, ID, MT, NV, AZ, UT, CO, WY, KS, OK, TX and watch the events terminate at the Arkansas border.

You will quickly see that the pressure which “terminates” at the Arkansas border finally releases itself via 1-2 events on the East coast US along the edge of the plate.

One final real life example. In 2011, the 5.9M earthquake which hit Virginia , causing damage on the East coast of the United States — that earthquake was PRECEDED by a 5.0M earthquake at the Colorado fracking operation, and multiple 4.0M earthquakes along the edge of the craton in WY, CO, OK, and AR.

August 2011, the defined edge of the craton is revealed by earthquakes leading up to the 5.9M event in Virginia which shook up the East coast, causing damage to the Washington monument. The 5.0M in Colorado happened in the same 24 hour period as the5.9M event in Virginia, clearly proving pressure transfer is occurring.

Pressure transfer is real, it happens virtually REAL TIME, and it is the first step towards accurately, scientifically forecasting an earthquake multiple days before it occurs — getting it down to a specific region to watch over a specific short time. 3-7 days or less from the point of the pressure showing itself via a swarm.

Currently, today (December 15, 2014), there are two main swarm locations, an old Volcanic fissure in Nevada, and the Oklahoma fracking operations. The pressure has NOW released itself on the East portion of the craton (in North Carolina).

pressure transfer earthquakes deep cluster to large single  (UNABLE TO FIND IMAGE)
Above: Past 7 days of 2.5M+ earthquakes showing the defined edge of the plate being moved (up to Dec. 15, 2014 230am CST)

This means we need to watch the WEST COAST in the area NW of the Nevada swarm for a single larger earthquake, now that the pressure has released to the East, we can expect a new push from the West over the next 2-3 days.

Then, after the push from the West occurs, watch for a quick flurry of 3.0M to upper 4.0M earthquakes in Idaho, Montana, Wyoming, Colorado, Texas, Oklahoma and Kansas.

-Written by Dutchsinse

Edited by E&W